All articles

Basics8 min read

Optimising Google Ads: what to review regularly after launch

Once a campaign is running, Google Ads shows an optimization score, recommendations and reports on search terms, impressions and bids. Optimising Google Ads means being able to judge which of these suggestions fit your own goals and how long it takes before the effect of a change can be assessed.

Contents

What does the optimization score in Google Ads show?

The optimization score is Google’s estimate of how well your account is set to perform and runs from 0% to 100%1. Alongside it, Google Ads shows a list of recommendations and, for each one, how much it would raise the optimization score if you applied it1. The score is calculated in real time from your account’s statistics, settings and status, and the available recommendations and your recent history with them are also taken into account1.

According to Google’s help, an account reaches 100% once all recommendations have been applied or dismissed1. A high score therefore doesn’t automatically mean that a campaign brings more inquiries or that an inquiry costs less. The optimization score has nothing to do with Quality Score, which assesses the quality of your ads compared with other advertisers1.

What the recommendations are aimed at

Which recommendations appear depends on your bid strategy. From it, Google derives the campaign’s objective, for example as many conversions as possible or a high conversion value1. If a campaign doesn’t use a Smart Bidding strategy, Google bases the recommendations on the strategy it recommends from your account and campaign data1. With “Maximize clicks” and tracked conversions, this might be a recommendation to switch to “Target CPA”1.

The “Include in ‘Conversions’” setting lets you choose which conversions count for this1. The article “Setting up Google Ads conversion tracking” explains which actions are suitable as conversions.

Do you have to accept every recommendation from Google?

Google Ads generates recommendations automatically from your account’s performance history, your campaign settings and trends on Google2. The Recommendations page doesn’t show whether a recommendation will succeed; it gives an idea of how performance might improve based on historical data2. You can dismiss a recommendation that doesn’t suit your campaign. If it becomes relevant again later, it may reappear1.

Anything that isn’t in the account doesn’t feed into the recommendations, for example how many jobs a business can take on in a month or which services bring it the highest contribution margin.

An example: broad match keywords

Among the keyword recommendations is “Add broad match keywords”3. With the broad match option, ads can show on searches that relate to your keyword, even if they don’t contain its exact wording4.

For a commercial cleaning company in Hamburg with the keyword “office cleaning Hamburg”, this can bring additional inquiries, but possibly also clicks from people looking for a job as a cleaner. After the change, the search terms report, described further down, shows whether the additional clicks come from potential customers or from job seekers.

Auto-applying recommendations

Recommendations can also be applied automatically. Google Ads then regularly applies recommendations of the types you have selected, checking daily which ones are eligible3. These include bidding recommendations such as “Bid more efficiently with Maximize conversions” and keyword recommendations such as “Add keywords” or “Add broad match keywords”3. The feature doesn’t increase your budget3.

Applied recommendations are shown on the History tab of the Recommendations page and individually in the change history3. If the cost per inquiry changes without anyone having changed the campaign, the history shows whether an automatically applied recommendation is the cause.

Which reports show what a campaign delivers?

Every account shows how many people saw your ad and clicked on it5. Whether those clicks turn into inquiries can only be seen with conversion tracking5. Without this data, a campaign can only be optimised for clicks and costs. The setup is described in “Setting up Google Ads conversion tracking”.

Search terms report

A keyword is the word or phrase you add to an ad group; a search term is what someone actually types into Google6. The search terms report shows which searches triggered your ads and how they performed6. Search terms with too little query activity are left out to meet Google’s privacy standards6.

Search terms that resemble your keywords but show that someone is looking for something else can be added as negative keywords7.

An example: the cleaning company in Hamburg spends €600 a month and receives 300 clicks at an average of €2.00. The search terms report lists 45 clicks from searches such as “cleaner Hamburg job”. These €90, 15% of the budget, bring no customer inquiries. With “job” as a negative keyword, this part of the budget can be directed towards searches by potential customers7.

All figures are freely chosen worked examples and not a forecast for your business.

Impression share

Impression share indicates how many of the impressions your ads could have received they actually received8. According to Google, it shows whether you could reach more potential customers with a higher bid or budget8. Two further columns separate the causes: “Search lost IS (budget)” shows how often your ads didn’t appear because the budget was insufficient, and “(rank)” how often a poor Ad Rank was the reason9.

The distinction determines which change is worth considering. If impressions are lost mainly because of budget, more budget can bring more impressions. If they are lost because of rank, the reason lies in factors such as ad quality, the competition and the context of the search10. According to Google, small fluctuations over time don’t necessarily mean you need to change anything8.

Change history

The change history lists all changes made in the last two years to your account, campaigns and ad groups and maps them on a timeline against performance data such as clicks, conversions and cost11. This makes it possible to see whether a change has affected performance11. Changes made by Google’s automated systems appear there under names such as “Google Ads system”11.

Optimising Google Ads: when changes make sense and when it is better to wait

How quickly a change can be assessed depends on how much time passes between a click and a conversion. Google calls this the conversion cycle12. For a locksmith, the call often comes shortly after the click, whereas someone planning a new kitchen often compares several suppliers before getting in touch.

The learning period in Smart Bidding

After major structural changes, a Smart Bidding strategy such as “Maximize conversions” or “Target CPA” shows the status “Learning” for up to seven days12. It is triggered by a new or reactivated bid strategy, by campaigns, ad groups or keywords being added to or removed from the strategy, and by a significant change to the conversion goals12. Changes to budget, targets, ads or targeting settings don’t trigger it12. Ads keep running normally during this time12.

According to the same help page, performance usually takes one to two conversion cycles to settle on a new target; after that, Google recommends evaluating it over two conversion cycles or two weeks, whichever is longer, and taking into account that conversions are often recorded only after several days12. Google advises against making several target changes within one conversion cycle unless they are necessary for business reasons12.

If it takes the cleaning company in the example five days on average from click to inquiry, two conversion cycles are ten days. The two weeks then apply, because they are the longer period.

Changing bids in small steps

For manual bids, Google recommends changing bids in small steps and checking how the keywords’ clicks and conversions have developed before the next change5. If a keyword has a low average cost-per-click and a high conversion rate, Google suggests trying a higher bid; with a high cost-per-click and a low conversion rate, a lower one5. This makes a larger share of the budget available for keywords that perform better5.

Budget

Budget changes take effect immediately and don’t trigger a learning period12. If a bid strategy shows the status “Budget constrained”, many of its keywords are limited by budget, and Google may not be able to raise bids enough to meet your goals13. Whether a higher budget pays off depends on what an inquiry is allowed to cost. How to work that out from what you keep from a job is shown in “Is Google Ads worth it for your business?”.

Testing larger changes

A larger change, such as a different bid strategy, can be tested as a custom experiment. The experiment receives a share of the original campaign’s traffic and budget, and both versions can be compared over a longer period14. Up to five experiments can be scheduled, but only one of them can run at a time14.

Which numbers you can clarify before you start

Google Ads only shows search terms, cost per inquiry and impression share once a campaign is running. Before that, you can already clarify how often people in your region search for your service, roughly what a click costs there and how many inquiries you need for the advertising to pay off. These numbers also help you judge whether a recommendation such as broad match keywords fits your goals. The calculation through to the advertising cost per new customer is in “Winning new customers as a service provider”.

Free potential analysis

Before you spend money on Google Ads: find out which results are realistically possible.

In our free potential analysis we examine your market and develop a first assessment of whether and how Google Ads could pay off economically for your business.

So you get a more solid basis for your decision on whether and how you should invest in Google Ads.

Free potential analysis
  • 30 minutes
  • Free
  • No obligation

What you find out in 30 minutes

  1. How high the demand for your offer isWe check how many people in your region search for your services every month.
  2. How strong your competition on Google isWe analyse which competitors already run ads and what the competitive situation looks like.
  3. Which ad budget could make senseYou find out which click costs you should expect and which investment seems realistic for your goals.
  4. How many additional customer inquiries could be possibleWe create a forecast based on available market data and various realistic scenarios.

We manage only one business per industry and region. Whether your spot is still available, we also check in the call.

We retrieved the sources on 9 November 2026.

  1. About optimization score, Google Ads Help
  2. About recommendations, Google Ads Help
  3. About applying recommendations automatically, Google Ads Help
  4. About keyword matching options, Google Ads Help
  5. Evaluate and optimize your bids, Google Ads Help
  6. About the search terms report, Google Ads Help
  7. About negative keywords, Google Ads Help
  8. About impression share, Google Ads Help
  9. Get impression share data, Google Ads Help
  10. About Ad Rank, Google Ads Help
  11. About change history, Google Ads Help
  12. About Smart Bidding learning, Google Ads Help
  13. About bid strategy statuses, Google Ads Help
  14. Set up a custom experiment, Google Ads Help

Read more

All articles

Free potential analysisChoose a time

We check for you

  • Search volume for your offer

  • How strong your competition is

  • What a new customer costs you

Do you want to know this for your business?

Question 1 of 7

Are you already running Google Ads?

We check for you

  • Search volume for your offer

  • How strong your competition is

  • What a new customer costs you